Smart cabinet light (clock + hand sweep) DMK-025PL

Short Description:

DMK-025 smart cabinet lamp comes have three open/use styles: human body sensor, hand sweep chronograph and hand sweep clock. From the outside, the hand sweep chronograph is very similar to the clock model. The timing model has a countdown, reminding function; The clock model can display the time, showing the value of hours and minutes. DMK-025 product structure is mainly composed of circular PCB board and LED lamp tubes on both sides. The outer ring of the circular PCB board can be opened to emit blue light, and the LED lights on both sides can rotate 360 degrees. A potentiometer is also installed at the center of the circular PCB in the middle of the manual sweep, which is used for timing and adjustment after opening.

This picture is DMK-025PL, human body sensing model.


Product Detail

Product Tags

Product details:

1. Touch switch: single touch to turn on/off the LED light bar is always on, long press stepless dimming (with memory, the brightness after turning on is the brightness last turned off) the highest brightness is 100%, the lowest brightness is 10%; double-click to enter Induction mode, there is a flashing light prompt, touch again to exit the induction mode;Ambient light switch: single touch to turn on/off the ambient light on the outer circle of the product is always on, double-click the ambient light to become breathing

2. Induction function
In the sensing state, the light is ≤10lux, and the human body moves within the sensing range, the light will be turned on, and the sensing range is the entire fan-shaped area in front of the light emitting within <3-5m; if the person moves within the sensing range, the light will continue to be lit, and the person will leave for 20s Then turn off the lights. (Long press in the sensing state can also be infinitely dimming);

3. Endurance
The induction lamp has a built-in 4400mA large-capacity 18650 lithium battery. It can work continuously for about 10 hours in the brightest state. If it is inducted 5 times a day, it can work for 200 days. About 7h, the red indicator light will light up in the charging state, and turn into a green light when it is fully charged.

Application: Cupboard, wardrobe, Corridor, storage room, mirror lamp

Products description:

Plug standard Power/w Colour Wire length /m Battery capacity Color box gross weight/KG Product size/mm Carton size/mm Packing quantity/PCS Gross weight/KG
Micro-USB 3.2W White 1M 4000 mA (Polymer battery) 0.358KG 475*88*34 525*315*350 18 7.8

Product Information

Smart-cabinet-light-clock-+-hand-sweep-DMK-025PLsingle

STEP 1

STEP: 1

lnstall the two lamps on the main body
Left and right sides

STEP2

STEP:2

Just stick the traceless double-sided tape on the back
Paste anywhere

STEP3

STEP: 3

Rotate counterclockwise to remove the charge

1Smart-cabinet-light-clock-+-hand-sweep-DMK-025PLsingle

STEP: 4

Fully charged on the base clockwise

products video


  • Previous:
  • Next:

  • Write your message here and send it to us